Showing posts with label kingpin. Show all posts
Showing posts with label kingpin. Show all posts

Sunday, January 15, 2012

Stereo Vinyl Cruiser trucks kingpin upgrade.

 
Get my things.
stock truck, new bushings, some washers, standard kingpin and nut-2"3/8"24tpi,  skate tool, JB Weld, and 17mm wrench.

 
The stock kingpins are big and weird.  Take apart truck


 
Comparison shot of the 2 kingpins.  Insert new Kingpin.

Mix up your JB Weld with something you wont need anymore.  Then dump in and beside the head of the kingpin.  You don't have to fill up the hole, just get enough on the sides so that the kingpin wont spin when you tighten it.  Try not to get very much on your hands and none on your phone.  And none on the counter.  Good luck. 


Then I put he washers, bushings and hanger on to get it lined up then a clamp to hold it straight  and leaned it against the wall until it cures.  
And then... go to sleep.
The next day, All hardened.  Tighten up the kingpin bolts with your eyes closed thinking there is no way that stuff is going to hold.  Then it holds and your trucks are done.  I have done this on shortboard trucks before and it holds up pretty well.  Little pieces might chip off but you will still be able to tighten and loosen the trucks.

For more discussion please check out plasticskateboarding.com/forum 

Friday, August 12, 2011

Skateboard Kingpin Size

I need a new kingpin for one of my trucks. Kingpins are 3/8″ diameter and 24 threads per inch. To tighten or loosen these you need a 9/16″ wrench.