GFH 3" Trucks

I just got these GFH trucks from Churchill Manufacturing.  I was browsing their site looking at the penny killer and the price on them was so awesome I decided to try a set.  I needed a thin set of trucks for a board I was making anyway.  I am glad I got these the closest competition for the price was Penny trucks and these have at least two advantages so far.
First, they are drilled with standard 6 hole mounting.  They will work on any board with new or old school mounting.  Second, I pulled them apart and checked the pivot cup and it is a standard size.  It can be replaced with the small Khiro cups.  I used the soft ones because I am out of the hard and it was still pretty tight so the hard may or may not work.  I took it for a test ride and the soft definitely work though.  The pivot itself is kind of blunt and not rounded, I haven't seen that before.
The kingpin is one of the loose ones with the square bottom but us the standard size and thread.  The bushings kind of sucked so I replaced them with blue Khiro barrels and short inserts.  I will probably swap them to something a little harder but I was out of Khiro red.  

Taken for a few test rides now, they feel pretty good.  More when i get a little more time in on them.

Green Banana Lil Nanner

Just got this new deck set up, It is a Green Banana Lil Nanner.  I like the other Green Banana that I have and got this one to compare with the Penny and Flexdex decks I have in this size range.  It is set up with some older tracker B-2s, with Khiro inserts roadside and Venom barrels boardside.  Angled risers also, with the front wedged and the rear dewedged.  The wheels are Kyrptonics Classics, 62mm 78a, with bones reds. 

Green Banana Skateboards

Just got this board, it is made by green banana skateboards.  

1/2 inch thick with a little nose and tail, no concave. Made of some kind of plastic and 

came with clear grip.  

I set it up with Indy Stage 10's and Cadillac wheels.  The trucks have Khiro insert bushings, red

in back and blue in front.  The wheels are 56mm and 78a.

Khiro Insert Skateboard Bushings

These are Khiro Aluminum Insert Bushings.

The tops and bottoms are around 1″ wide at the widest point. They are both about 3/4″ wide at the aluminum insert. The top is approximately 7/16″ tall and the bottom is about 9/16″ tall.

The colors and hardnesses are:
White, extra soft, 73a
Orange, mid soft, 79a
Blue, soft, 85a
Red, med soft, 90a
Yellow, med hard, 92a
Black, hard, 95aPurple, extra hard, 98a

Khiro Standard Barrel Bushings

Khiro Standard Barrel Skateboard Bushings

The bottom barrel is 1″ wide by 9/16″ tall. The top cone tapers from 3/4″ to 1″ wide and is about 3/4 inch tall.

The colors and hardnesses are:
White, extra soft, 73a
Orange, mid soft, 79a
Blue, soft, 85a
Red, med soft, 90a
Yellow, med hard, 92a
Black, hard, 95a
Purple, extra hard, 98a

Fledex Grenade

Flexdex Grenade, no concave, 23" long.  Setup with Tracker Midtracks and some Sector 9 wheels.

Soft wedge risers and Khiro bushings.

Flexdex v30

Set up with Lemon and Lime 70mm Zig Zags and cut down Randal Trucks.

The deck is completely flat with cutouts along the rails to increase the flex.  This one is the older green Flexdex material.  Bushings are Khiro barrels on bottom and tall inserts on top, both blue on the back and both white on the front.  The lime wheels on the front are 80a and the lemons on the back are 83a.