Globe Tailpads on Penny and Green Banana

It got cold here so i finally got around to playing with the Globe Tailpads.  I used 2 of the ones that I bought.  I put 2 on a Green Banana Skateboards Lil' Nanner so the whole deck is covered.  After applying them I had 2 strips about 2-3" left over.  I used those to cover the tail of my black Penny and then used clear grip to cover the front half.  I think they look pretty cool.  They cut easy, but it is much harder to get perfect looking edges on the cut than it is with grip tape.  I will probably replace the clear grip tape on the penny with black.  I forgot how much clear grip tape sucks.  It doesn't stick the same as black, and this being the first time I have tried clear on a Penny I don't think it is going to hold up.

I took them for a ride right after.  They are grippy.  Maybe not as much grip as new grip tape but a different kind of feel.  The larger blocks feel like they stop your foot not just give traction like grip tape does.  It's hard to describe and not bad, just different.  

I will have more to say after getting more time on them, I only took a short ride on each last night.

for comments or discussion, thread about this post in the plasticskateboarding.com forum:

http://plasticskateboarding.com/forum/index.php?topic=184.0

for comments or discussion, thread about this post in the plasticskateboarding.com forum:

http://plasticskateboarding.com/forum/index.php?topic=184.0

Globe Traction Pads

I used to build a lot of wood boards in my garage for fun.  I started with flat plywood, then started to layer the wood for concave and tails, then started to use fiberglass and then started to make foam cores with wood and fiberglass to strengthen it.  It was fun but I have not made one in a while.  I have lately been more interested in plastic skateboards so I have been buying different types of plastics and melting and bending and researching them and its even more fun.  I have made a couple that are functional and have broken a whole bunch more.  I will post pics of board and some of that experience at some point when I am better at it.
I bring all this up because on the favorite board I ever made, this foam core mini.

I used clear grip tape on the front and used part of a surfboard traction pad as the back half of the grip.  It was and still is awesome.  Looks really cool and provides plenty of grip for a cruiser.
Surfboard traction pads are too expensive, at least $30 and only cover half the deck, to use on every board when a full sheet of grip tape is $5 or less.  I was excited sometime ago to see Globe made their Cruiserboard Tailpad.  The price was still $20 but a little better.  I held off even though I considered buying one or two a couple times.  The other day I was ordering a few things and in the sale section of a big online shop were the Globe tail pads for $6 a piece.  I got a few and they just came today.  They feel just like the surfboard traction pad on my foamcore.  They are going to work well on flat decks.  I am going to try them on the Penny or Stereo and it they stick well enough and seem like they are going to hold up for a while I thing I need to order a few more for that price.

Ill add another post with my thoughts when I get some time riding them in.  In the meantime please visit the plastic skateboarding forum for questions or discussion.
http://plasticskateboarding.com/forum/index.php?topic=184.0

Globe Bantam

It has been raining a lot here so I put some new grip tape on my Globe Bantam yesterday.  It didn't take as long as I thought to cut the edges along the decks pattern.  I had this idea for a while and kept putting it off.  I like how it turned out.

For more discussion please check out plasticskateboarding.com/forum 

Penny Vs. Globe Bantam Vs. Stereo Vinyl Cruiser Vs. Fish Skateboards

For more discussion please check out plasticskateboarding.com/forum 

My thoughts after exactly one week of having the Globe Bamtam and much more weeks of having the 3 other boards.

From Left to Right: Penny Skateboard, Globe Bantam, Stereo Vinyl Cruiser, Fish Skateboard

The decks of the Penny, Stereo and Fish are all very similar.  The Bantams differences are pretty big in comparison.  The Globe is bigger, 6.5x23.5 vs the others 22.5x6.  It feels bigger that the difference in the number suggest to me, maybe because it tapers less towards the tail.  I have read elsewhere that the Bantam was stiff.  I do not find this to be the case.  I found the Bantam to be the most flexy, followed by the Penny and the Stereo and Fish to be the stiffest.  A factor is that the Globe has a little longer wheelbase, not by much though,  Most of the extra length on the Globe is in the nose and tail.  

The grip pattern is unique, but after riding it to the beach a few times and riding it home with wet shoes it will still need a sheet of grip tape before too long.  

I feel like the trucks are the biggest difference between these stock.  The slant trucks are pretty standard new school trucks, just narrowed to fit the board.  Much better in my opinion than the Penny or Stereo versions.  The Penny and Stereo boards did come with more appropriate bushings though.  The Slant trucks on the Bantam came with what I believe are 94a bushings.  These feel a lot stiffer than I would normally ride on a cruiser like this.  That will probably be the first thing I replace on the Bantam as I keep riding it.

The Bantams wheels I really like also .  They are a little wider, bigger, 62mm and harder, 83a than the Penny or Stereo.  I have been riding 62mm wheels on the Stereo and they might be my favorite size right now so these wheels are just about perfect.  The photos show them vs. wheels that come stock on a Stereo Vinyl cruiser.  Both good sized wheels if a little different.  The slightly harder Globes fit my preferences better though.

The bearings seem pretty good so far also, Im not sure if I will be swapping them out once I start to upgrade the Bantam.  

Hardware is standard, I was a little surprised that the Globe came with risers.  1/4"

This is the only board of the 4 with risers, the wheels are a little bigger, but with the hardness of those bushings a don't know if they are needed.  I may leave them on because I will go to much softer bushings, but I will probably try with out too for a while.

More thoughts to come as I get more time in riding the new board.

For more discussion please check out plasticskateboarding.com/forum 

Globe Bantam to the beach

I am going to post some comparison pics of this guy to a Penny and Stereo soon.

                                      

Globe Bantam First Impressions

I finally got a Globe Bantam yesterday.  I got it from a local shop, Reno Beach.  The owner also has Johnny Reno's, a bar and restaurant on the St. Pete Pier that my friends and I eat at a lot during our BMX rides.  After going there all the time and talking with Johnny about skateboards quite a bit we agreed on some of our impressions of the Penny, Nickel and Stereos.  He was out of the Globes but I decided I would finally get one when he got them back in.  

So last week he lets me know they are in.  It took me a week to get down there and buy it, but I picked it up yesterday.  Reno Beach is an awesome shop and the folks there were really cool, if anyone is in the area please check it out.  

On to the board.  I rode it for a while as soon as I got it home without changing a thing.  

The deck is a little bigger than a Penny or Stereo, and there is a little more nose.  The flex didn't jump out as being drastically more stiff or flexy but I didn't compare side by side yet.  Pretty grip pattern, I like it more than the Penny, maybe not as much as the Stereo, but that doesn't matter much as I think it will soon be covered by grip tape.  Nice design deck, that stands out from the similar Penny, Stereo, Fish and Brighton Boards.

The trucks are more like new school skateboard trucks than the Penny or Stereo's.  They are made by Slant, a company I knew made some long boarding trucks, but these are the first traditional trucks I have seen by them.  They aren't bad.  

I was surprised that they had pretty stiff bushings in them.  I didn't adjust them at all and as soon as I hopped on the board I was surprised by how tight the trucks feel stock.  I will adjust them a little and try them out, but will definitely be changing the bushings soon.

The wheels are similar size to the Penny and Stereo wheels, but Globe branded.  I will have to ride them for a while before I form a solid opinion.  The bearings are also Globe branded and say ABEC 7 on the shields.  They didn't feel bad, but I will have to ride them a little more before I decide on keeping or swapping them.  

Over all it is a solid board.  I am going to have to spend some time on it before I know if I like it better than the Penny style boards because they are all really similar and this is quite a bit different.  So far it is a really fun little board, can't wait to get some more time in on it.

For more discussion please check out plasticskateboarding.com/forum